I've got a ton of fretboards if you need any. ebony and EIR

Discussion in 'Member Classifieds' started by shadpeters, Feb 3, 2015.

  1. shadpeters

    shadpeters New Member

    Joined:
    Feb 3, 2015
    Messages:
    1
    Likes Received:
    0
    Hey guys so first off, I'm really sorry that this is my first post here, its sort of dictated by circumstances. Some of you know me already from other forums and will already have heard that about a month ago my shop burned completely to the ground. My name is Shad Peters, I have been building about ten years, mostly solid and hollow body electrics. Peters Guitars| Custom handmade guitars by luthier Shad Peters

    Recently I had a chance to buy a pretty large quantity of east indian rosewood and gabon ebony fretboards at a pretty steep discount. Under normal circumstances I would probably keep most of it, but in light of the recent shop fire I think I'm going to try selling a good chunk of it to help get some extra cash flow going. It helps me get back on my feet and saves you guys a little money, seems like a win win to me. They are all good seasoned wood that's ready to use, I bought them from another builder and some pieces were as much as 25 years old. The EIR is almost all blanks, and the avg dimensions are 2.5" at the nut end, 3" at the heel end, and 5/16" thick. Most fall between are 19.5-21.5" long. If you have any specfic dimension needs just let me know. I'm gonna ask 8 dollars a piece for the EIR blanks, 7 dollars for 10 or more.


    if you are interested, please use your Paypal email address and message me at petersinstruments@live.com. Please include your shipping address so I can let you know what shipping will be, the quantity you are interested in, and if you have any coloration preferences. I'll field any questions in this thread so I don't have to answer the same thing over and over again. If you want to mix and match 10 of each i'll do the discount on it that way to.

    Here's a few photos of avg EIR boards, they are all really nice.

    [​IMG]

    [​IMG]

    [​IMG]

    I have quite a bit of ebony, but I don't have any blanks left. What I have are all slotted, some are radiused, some are already drilled for side dots, some are bound already, etc. So, here is everything I have at the moment, all broke down into groups. I have numbered each individual board so that you can reference specific pieces that you want. most of these slotted ones have a couple locating holes drilled in the back side, but they shouldn't hurt anything. These ebony boards are also closer 1/4" thick where as all the rosewood boards were closer to 5/16.


    So this first group of boards was marked as 25.5", but by my measurments they look like 25.4. All I have to check them with is a tape measure since all precision measuring tools were in the fire, but I am pretty confident they are 25.4. Four of them have 20 fret slots, one has 19, and one has 21. they are all marked in the photo. These boards also have a radius. I checked it against a sanding beam and they appear to be 12". They are a little dirty, but will clean up really nice. I'd like to get 30 a piece for these.

    [​IMG]

    These two are a little odd, it took me a while to figure them out. I am just about positive that these have been cut for a 25" scale, but the nut "slot" had not been cut yet, you can tell there is a lot of headroom left to make that last cut. So if you buy these you can either use them as they are which would be an 18 fret board with a 23.5ish inch scale, or you can make that last cut for the nut and have a 25" 19 fret board. these two boards are already tapered and measure 1 23/32 at the first slot, and 2 7/32 at the last slot. not drilled for side dots, and no binding. you can trim these and ad binding to make them whatever final dimensions you want. I think 22 a piece on these would be fair.
    [​IMG]

    These next two groups of boards have exactly the same specs as the group in the last photo except that they appear to be two thin pieces of ebony laminated together to make one board. I didnt realize there was anything like this mixed in when I bought them, but they should still make a good fretboard. I'm gonna ask 18 a piece on these since they laminates, they are still really nice looking boards.
    [​IMG]

    [​IMG]

    Here are four boards slotted with a 26" scale for 21 frets. There is some room left at the bottom so you could cut a few more fret slots if you wanted to. no radius, no binding, and really good dark color. I think 24 a piece on these would be fair.
    [​IMG]

    This group of boards has a 25.5" scale length, 12" radius, and each has been pre drilled for 1/16" side dots, and offset 3/32" face dots. They are slotted for 22 frets, but the ends have had some unique treatment, so some may find it best to trim them down for a 21 fret neck or less. these measure 1 7/8" at the nut and 2 7/16 at the last fret. I'd like 25 a piece for these.
    [​IMG]

    These boards are exactly the same as those photographed above except that they measure 1 23/32 at the nut and 2 5/16 at the last fret. 25 a piece for these as well
    [​IMG]

    Here is that unique treatment of the ends that I was talking about.
    [​IMG]

    This group of boards have a 25.4" scale, pearl dots, ebony binding, 22 fret slots, and no radius. they measure 1 7/8" at the nut, and 2 3/8" at the heel end. They have the same treatment of the end of the board as the last two groups did. I'd like to get 25 a piece for these.
    [​IMG]

    Here is another group with a 26" scale length. These have already been bound in ebony, they are flat, and have 20 fret slots. They measure 2" at the nut end and 2 7/16 at the heel end. I imagine they would probably need to have the binding trimmed off, have the board resized, and then new binding glued on unless you just wanted a really wide fretboard. 22 a piece on these
    [​IMG]

    These three are kind of odd balls, they are the same the other 25" scale boards in that they have been pre drilled for inlays and side dots, have a 12 radius, and have the same treatment at the heal end of the board. but one has ebony binding on it, and all three are laminated and have a mahogany strip glued to the back. I'm just gonna ask 15 a piece on these since they are kind of wierd. [​IMG]

    [​IMG]

    [​IMG]

    here are two more odd balls that didnt fit in with the other groups, both have the nut width written at the top of the board. one has rosewood binding, the other has ebony binding, the ebony bound one is flat, the other has a 12 inch radius, both have 22 frets. the rosewood bound one has been prepped for fretboard inlays. 20 a piece on these two boards.

    [​IMG]

    [​IMG]
     
  2. Purelojik

    Purelojik New Member

    Joined:
    Apr 24, 2013
    Messages:
    588
    Likes Received:
    365
    Location:
    Newport Beach California
    i'll email you for sure!

    I hope things work out. I sent some love via the GoFundMe when it started!
     
  3. Renkenstein

    Renkenstein Well-Known Member

    Joined:
    Jul 12, 2013
    Messages:
    897
    Likes Received:
    480
    Location:
    Kansas City
    Emailed! Welcome to the forum Shad. I'm so very sorry for your loss.
     
  4. difalkner

    difalkner Member

    Joined:
    Nov 10, 2014
    Messages:
    31
    Likes Received:
    11
    Location:
    Bossier City, LA
    My EIR blanks came in today and they look great. Thanks, Shad!
     
  5. Adam

    Adam Well-Known Member

    Joined:
    Jun 6, 2013
    Messages:
    1,511
    Likes Received:
    884
    Location:
    Austin, TX
    I saw the news about the fire, glad you're trying to pick up the pieces. I had a shop flood a bit over a year ago that really nearly tanked me, 5.5ft of water through a shop I had only moved into a few weeks before. It's tough, but you can get through this.
     
  6. aeleus

    aeleus Active Member

    Joined:
    May 11, 2013
    Messages:
    228
    Likes Received:
    77
    Location:
    Maryland, USA
    I just received 4 of the rosewood fretboards. Quick, easy and great price. They're nice looking boards too!

    Thanks Shad.
     

Share This Page